The new, patent FLOWMASTER is a state-of-the-art flow-based ", filter-life monitoring device.As the result of a unique, ultra-miniaturized, built-in flowmeter, the FLOWMASTER Continuously monitors the flow-rate of running water and displays it prominently on the LCD.When the water Has Been Turned Off, The Consumer is Then Calculated volume and added to the total volume and dog Accumulated be reviewed at a glance.The FLOWMASTER Measures the volume of water and displays it up to "9999Gallons."
The FLOWMASTER is a must-have for all health conscious modern family.Its modern, smart-looking design is compatible with all drinking-water purification or filtering systems.Say goodbye to the frustration of wondering Always When to change your filters!FLOWMASTER Comprehensive is the most available solution to your drinking water Assure That Always Delivers system drops the very best of your life.
Features:
Flow-based, NOT conventional time-based.
Monitors up to 5 filters simultaneously.
Real-time "Flow Rate" and "Accumulated Volume" display.
Bar display for residual filter life.
Built-in audio alarm alerts user for filter change.
Independent filter setting value life.
Quick and easy two-step installation.
High sensitivity: Able to detect flow rate as low as 0.1GPM.
High capacity: Measures up to 2GPM of Treated water.
FDA-approved materials guarantee user safety.
Built-in memory chip to secure Consumption info.
Flow-sensing output signal.
Auto shut-off.
Available in Gallon and Liter. NEW!
Specifications:
0.1 - 1.0GPM (0.37 - 3.7LPM) NEW!
Unit: U.S. Gallon / Liter or GPM / LPM
Accumulated Volume Range:
0-9999Gallons/Liters
No. of Filter monitors: 6 (factory setting: 5)
Connector: 1 / 4 "quick fit
Accuracy: ± 5%
Storage Temperature: 0 - 85C
Operation Temperature: 10 - 45C
Endurance Pressure: 100PSI (7kg/cm2)
Material: FDA approved
Body: ABS
Tube: Heat Resistant ABS
Quick Fit: POM
Sensor: Silicon
Gel: Medical Standard
Dimensions: 122mm (L) x 34mm (F)
Weight: 60g
Power: Two 1.5 V AAA batteries
Expected Battery Life: 18 months
SennotechQuality Monitor
Quick and Accurate Way of Knowing your TDS
Have Sennotech That made this 24v powered Constantly displays the IN and OUT TDS reading, this is Ideal if You Have a 24v system PUMPEN RO
Features
Measures and displays TDS values Before and After Treatment-through system water flows.
Real time Calculation of removal rate.
Removal rate indicator:
Removal Rate> 80% Green Flash
Removal Rate <80% Red Flash
3-digit LCD display
Generic design fits all systems.
MOUNTING Easy.
Button control (battery saving).
Back light (displays lap for 15 minutes to extend life) LCD shows Still reading.
Specifications
Range: 0 to 999ppm
Sensitivity: 1PPM
Accuracy: + / - 2%
TDS Probe Tubing: 1 / 4 "
Button control
Power: 24v (Transformer required Can be run or of existing pump 24v power supply)
